Connecting The "Out" Cable To The Charging Station - NOVARDEN NRL630 Manual De Instalación

Installing the perimeter cable

Connecting the "Out" cable to the charging station

Strip one end of the cable (Figure 1). Insert the stripped end into the
connector and clip it in (Figure 2). Attach it to the back of the charging
station left terminal (Figure 3). Pass the cable under the charging
station making sure that it is secured underneath using the notches
provided (Figure 4). You can start marking out your lawn (Figure 5).
Figure 1
When laying
start from
locate your charging station (Figures 1 and 2).
Figure 1
Figure 2
Figure 4
the cable,
the place where
35 cm
Figure 5
which marks
you
11
Figure 3
out your lawn,
have chosen
35 cm
Figure 2
EN
to