Servicing The Tacker; Cleaning Housing And External Surfaces; Slight Contamination; Serious Contamination - Prebena 1GP-A16 Manual Del Usuario

Servicing the tacker

The tacker must only be serviced by persons with the required
knowledge, skills and experience. All work not described here must
be carried out by the manufacturer's aftersales service or at the
manufacturer.
 Disconnect the tacker from the compressed air supply prior to
cleaning work.
 Empty the magazine.

Cleaning housing and external surfaces

CAUTION
Unsuitable cleaning agents can cause damage to the tacker or
accessories.
 Clean only with a dry or slightly damp cloth or a cloth
dampened with a mild soap solution.

Slight contamination

 Wipe off the tacker housing with a dry cloth.
 Oil all metal parts of the tacker thinly with PREBENA special
nailer oil.

Serious contamination

 Wipe off the tacker housing with a cloth dampened slightly with a
mild soap solution.
 Then wipe off the housing with a cloth dampened slightly with tap
water.
 Finally wipe the housing dry with a soft, dry cloth.
 Oil all metal parts of the tacker thinly with PREBENA special
nailer oil.
WARNING
Accidental triggering when emptying the magazine
can lead to serious or fatal injury.
Servicing the tacker
25