Preparation Of The Compressor To Start Operation; Compressor Unpacking; Compressor Gathering - Prebena AEROTAINER 240 Manual Del Usuario

Preparation of the compressor to start operation

Compressor unpacking

Compressor unpacking is carried out by two workers.
WARNING
Do not allow children to play with the packaging film, there is a danger of
suffocation.
Save the packing material.

Compressor gathering

Some components are supplied separately in package and they are not installed on the compressor.
VIGON 120:
oil-filling hole plug (2)
air filter (3)
TWINSTAR 450 и
TWINSTAR 690:
running wheels with
axes and screw nuts
(1)
oil gage (2)
rubber feet with mount-
ing screws
handle for transporta-
tion with mounting
screws
VIGON 120:
Fix air filter (3), screw it manually on the cylinder head.
Remove transport plug of oil-filling hole.
Set the plug (2) on the neck of oil tank by turning it.
VIGON 240:
Put axes into holes on the smooth side of running wheels (1).
Fix axes from the side of tail bearings (nut with the key 17).
Fix air filter (3), screw it manually on the cylinder head.
Remove transport plug of oil-filling hole.
Set the plug (2) on the neck of oil tank by turning it.
Do not allow children to play with the packaging film.
Packing material keep out of children's reach.
VIGON 240:
running wheels with
axes and screw nuts
(1)
oil-filling hole plug (2)
air filter (3)
Preparation of the compressor to start operation
Place the box in front of you.
Open the top cover of the box.
Hold tight the box by carrying holes (1).
Carefully remove the compressor
from package (2) and place it in front of you.
Remove all packaging material
from compressor.
VIGON 300:
running wheels with
axes and screw nuts
(1)
air filter (3)
ORKAN 215:
oil gage (2)
21