Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
GETTING TO KNOW YOUR CLEANER
A.
Main Cleaner
B.
Hose
C.
Hose Handle**
D.
Suction Regulator*
E.
Telescopic Tube**
Ea. Telescopic Tube Latch*
Eb. Telescopic Tube Adjuster**
F.
Carry Handle
G.
LED Bag Check Indicator
H.
On/Off Pedal
I.
Cord Reel Pedal
J.
LED Display Screen*
K.
Variable Power Control Button**
K1. Variable Power Control Slider**
L.
Tool Holder*
M.
Floor Type Selector Pedal**
N.
Carpet and Floor Nozzle (GP)**
N1. Carpet Nozzle (CA)**
N2. Hard Floor Nozzle (HF)**
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1.
Connect the hose to the cleaner main body, ensuring it locks into position. [1]
To release the hose: rotate the connector counterclockwise and pull it.
2.
Connect the hose handle** to the end of the fixed tube upper end and store the
accessories on the tube. [2A,3B]
3.
Connect the tube lower end to carpet and floor nozzle**. [3A]
USING YOUR CLEANER
1.
Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [6]
2.
Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster
and raise or lower the tube to the most comfortable cleaning position. [5]
3.
After connecting the telescopic tube lower end to Carpet and Floor Nozzle** or
accessories if required, press the floor type selector pedal* on the nozzle to select
the ideal cleaning mode for the floor type.
*Certain Models Only ** May vary according to the model
O.
Carpet and Floor Nozzle Latch*
P.
Carpet and Floor Nozzle Slider*
Q.
Exhaust Sponge Filter**
R.
Exhaust Filter
S.
Bag Door Release Latch
T.
Bag Door
U.
Pre-motor Filter
V.
Bag holder
W. Bag
X.
Accessory Set*
X1. Crevice Tool*
X2. Dusting Brush*
X3. Furniture Nozzle*
Y.
Pet Hair Remover Mini Turbo Nozzle*
Z.
Allergen Remover Mini Turbo Nozzle*
AA. Parquet Nozzle*
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for deeper cleaning.
Carpet & Floor Nozzle**: [4]
-
Hard floor Cleaning: Press the pedal on the nozzle on Hard Floor mode and adjust
the slider on the nozzle on ALL FLOORS. In this position brushes, wheels and wiper
blade are lowered to protect hard floors. [4a]
-
Standard Carpet & Rugs Cleaning: Press the pedal on the nozzle on Carpet mode
and adjust the slider on the nozzle on ALL FLOORS. In this position brushes and wiper
blade are raised while wheels are lowered to allow a perfect ease of movement on such
surfaces. [4b]
-
Deep Carpet Cleaning: Press the pedal on the nozzle on Carpet mode and adjust
the slider on the nozzle on DEEP CARPET CLEANING. In this position brushes, wheels
and wiper blade are raised for a deeper cleaning of your carpet. [4c]
WARNING: It is recommended to avoid potential scratching of wooden floors that the
pedal is not set on hard floor mode and the slider on deep carpet cleaning.
Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [7]
4.
5.
Adjust the power level by pressing the variable power control button** or by pushing
the variable power control slider**. [8,9]
6.
Adjust the suction regulator* to the desired level. [10]
7.
Switch off at the end of use by pressing the on/off Pedal. Unplug and extract power
cord again to wind the power cord back into the cleaner.
Parking and Storage - The tube can be parked for temporary storage while in use, or
8.
in the storage position when not in use. [11]
ACCESSORIES
To obtain the best performance and energy efficiency
correct nozzles are used for the main cleaning operations. These nozzles are indicated
in the diagrams by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
It is important to note that this vacuum cleaner is supplied with an Energy Label as
required by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use on carpets.
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaner is not suitable for use on hard floors.
2
GB
#1
it is recommended that the
Publicidad
Tabla de contenido
