AR AWSF7R Guia De Inicio Rapido página 4

Adding Speakers (Stereo Mode)
If you have a second AR Sierra wireless speaker, you can use it together
with this one in stereo mode. To use 2 AR Sierra speakers together in
stereo mode:
1. Turn on both speakers. (Press and hold the Power/Pair button on the
back of each.)
2. Press and hold the Add Speaker button on the back of the first
speaker until the Power/Pair light starts flashing white.
3. The speakers announce "le connected" and "right connected" when
they're ready to play in stereo.
Once the speakers are connected with each other, the le speaker will
try to pair to your phone (its Power/Pair light will blink fast). Find the
AR Sierra in your phone's Bluetooth menu and connect to it. Once the
speakers are connected to your phone, the right speaker's Power/
Pair light will go solid white. The le 's Power/Pair light also goes solid
white and blinks off every 5 seconds. Keep your phone close to the le
speaker—that's the one it's connected to!
Using the Lighting Modes
The Lighting Mode button gives you control over this speaker's built-
in flame lighting. You can use the lighting whether the speaker's on
or off.
Press the Lighting Modes button to cycle through the multiple
lighting modes:
Big Flame and Small Flame provide different levels of the
speaker's flame lighting effect.
Pulsing Flame provides a flame effect that pulses to the beat of
your music.
White Light provides a so white light.
Flicker provides a flickering flame effect.
provides a firefly flame effect.
turns the speaker's lighting off.
4
Add
Speaker
Power/Pair Add Lighting
Speaker Modes
Volume
DC In Aux In
Speaker back
Lighting
Modes
Power/Pair
Add Lighting
Speaker Modes
Volume
DC In Aux In
Speaker back