Ego Power+ FN1800 Manual Del Usuario página 24

4. To remove any foreign particles clogging or restricting the nozzles, flush the
nozzle parts with water. To remove scale (mineral) buildup, clean the nozzle
parts with white vinegar or other de-scaling agent as necessary.
5. Reassemble the nozzles.
NOTICE: To prevent clogging, make sure that the nozzle is assembled exactly as shown
as Fig. 7.
6. Reattach the clean nozzles to the front grill guard.
FILTER MAINTENANCE (Fig. 8)
Periodically examine the filter at the
end of the intake tube to make sure
that it is in good condition.
1. Pull the filter off of the intake
tube.
2. Unscrew the filter into parts and
take out the sponge mesh.
3. Rinse the sponge mesh or
replace it if necessary.
4. Reassemble the filter and reconnect it to the intake tube.
24
56V LITHIUM-ION CORDLESS MISTING FAN — FN1800/FN1800-FC
8
Upper Part
Sponge Mesh
Filter
Lower Part