Introduction; Mechanical Installation; Dimensions; Modems Location - Adeunis RF ARF33-PRO Guia De Instalacion

INTRODUCTION

This document containts essential recommendations for optimum implementation of the modems in ADEUNIS
RF's ARFx3-PRO range.
Compliance with these recommendations will enable you to obtain communication over distances specified by
the manufacturer according to the model chosen.
For further details please refer to the user manual on our website: www.adeunis-rf.com - download section.
Our support service is available to provide you with full information concerning implementation of the product.
1.

Mechanical installation

1.1.

Dimensions

1.2.

Modems location

• Install the modem at a minimum height of 2m and not against the wall, ideally 20 cm away from it (5 to 10
cm minimum).
• In order to facilitate its attachment use the Rail-Din system for IP65 cases (Ref ACC1400AT).
• The RS232 cable must not exceed 15m in length and must be shielded.
208504A-V1.2-QUICK_ST_GUIDE
GB
11