Ridder Motor Controlunit Rmc50; The Control Unit - Ridder RMC50 Modo De Empleo

Ridder Motor Control Unit RMC50
THE RIDDER MOTOR CONTROL UNIT HAS BEEN DEVELOPED AS A CONTROL UNIT
FOR THE TUBE MOTOR. OTHER APPLICATIONS ARE ONLY PERMITTED AFTER RECEIV-
The Ridder Motor Control Unit is a control unit for a tube motor with run time protection. This
control unit offers the possibility of operating the tube motor both manually and automatically.
The control unit is also suitable for use with other 1-phase motors that have a power require-
ment of up to 90 watts. In this instance the limit switches have to be connected directly to the
motor and the maximum run time should not exceed 10 minutes.

The control unit

Description
RMC50-230\1\3D\3.0
RMC50-115\1\3D\3.0
U net-/motor voltage
~ phase
I electric current to motor
p frequency
RMC50-230\1\3D\3.0
The RMC50 is supplied with one loose and two fitted PG11 swivels.
RMC50 Accessories
- Tube motor + guiding
Fig. 1 1
Explanation of main components
1. Terminal strip
2. Terminal strip
3. Terminal strip
4. Fuse (I=4A)
5. Setting the run time
6. Control panel
6A Impulse push button
6B Impulse push button
6C Visual display
7. PG-Swivel
7A Swivel
7B Swivel
7C Swivel
8. Connector
RMC50 / 0502
Ridder Aandrijfsystemen BV HARDERWIJK NEDERLAND Tel.: +31 (0)341-41 68 54
ING SPECIFIC APPROVAL FROM RIDDER AANDRIJFSYSTEMEN BV.
U ~
V
230 1
115 1
Outgoing current
Number of wires for connecting the motor (excluding earth)
phase
Voltage
Control unit name
Mains connection
Motor connection
Connection for external operation
Up-Stop-Down-Stop
Automatic-manual operation
Automatic-manual operation or system fault
Mains voltage
Motor
External control (supplied separately)
Connection for the lid on the print plate
Internet : www.ridder.com Fax: +31 (0)341-41 66 11
Control unit data
I p U-ex
A Hz V
3 50 24 AC/DC
3 60 24 AC/DC
U-ex maximum voltage to external connection
I-ex maximum current to external connection
IP protection class
m weight control unit
I-ex IP m
mA kg
6 55 0,4
6 55 0,4
12