Cramer 82P Manual Del Usuario página 11

SCREEN
When the LCD display flashes the
"OVERCONSUMPTION" message on the
top line, it indicates the following:
1. The pruning shears have performed more
than 50,000 cutting cycles.
2. The average current of the last 1,000
cutting cycles is very high in relation to the
total average of the cutting cycles.
For more information, see Troubleshooting.
DESCRIPTION
Table 2. Acoustic signals
SIGNAL OPERATION
One Opening
beep operation
Two Cutting cycle
beeps
Three Close
beeps Stop
Five Maintenance
beeps warning
Ten Maintenance
beeps warning
ACTION TOOL STATUS
Trigger pressed Blade opening
and function
button. 2 seconds.
Trigger pressed Blade opening
for 2 seconds change
with blade closed.
Trigger pressed Pruning shears
and function turn off
button. 2 seconds
with blade closed.
During operation. Battery
capacity at
20%.
Prepare to
charge.
During operation. See
Maintenance
Cycle Control.
cramer.eu
GB EN
11