EWT OR110TLS Manual Del Usuario página 3

Dear Customer,
Please read the following information carefully before using the appliance
for the first time for your own safety and to ensure correct use.
Attention! The appliance may only be used for normal domestic use and not for
industrial purposes.
Important Safety Advice
• The appliance must only be used as described in the instructions for use! Use
for any other purpose is forbidden! Any damage resulting from improper use and
non-observance of the safety information will invalidate any liability and warranty!
• All liability is disclaimed for any frost damage caused by a heating capacity that
is insufficient for the room size, bad heat insulation of the room, incorrect use or
force majeure (e.g. power failure).
• Only connect the appliance to A.C. mains as specified on the rating plate!
• Never touch live parts! Danger to life!
• Never operate the appliance with wet hands! Danger to life!
• The appliance must be placed in a way that the control elements cannot be
touched by persons who are in bath, shower, or any other water-filled receptacle.
• The appropriate regulations of the country regarding installation of electrical
equipment in such areas must be adhered to!
• Do not use the appliance in rooms with bath, shower or swimming pool or in the
vicinity of wash basins or water connections!
• Do not expose the appliance to rain or other moisture! The appliance is not for
outdoor use. The appliance must only be stored indoors!
• Never use the appliance if the appliance or cord is damaged. Risk of injury!
• Check the power cord regularly for damage.
• If the power cord is damaged it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
• Improper repairs can expose the user to considerable danger.
• The appliance may only be opened up and repaired by authorised qualified
personnel.
• Do not store or use any flammable materials or sprays in the vicinity of the
appliance when the appliance is in use. Fire hazard!
• Do not use the appliance in flammable atmospheres (e.g. in the vicinity of
combustible gases or spray cans)! Explosion and fire hazard!
• The appliance should not be used in areas which are a fire risk, such as garages,
stables, or wooden sheds.
• Important! Do not insert any foreign objects into the appliance openings! Risk
of injury (electric shock) and damage to the appliance!
• Place the appliance so that it cannot be touched by accident. Risk of burns!
The appliance will cool down gradually after being switched off.
• Do not place any items of clothing, towels or similar on the appliance to dry!
Overheating and fire hazard!
• The appliances is not suitable for connection to permanent wiring!
• Only connect the appliance to a properly installed socket-outlet with earthing
contact.
The installation of a residual-current-operated protective device with a rated
tripping current of maximum 30mA will offer additional protection.
Please contact a qualified electrician.
• This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities, or a lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance!
• The socket-outlet must be accessible at all times to enable the mains plug to be
disconnected as quickly as possible!
• The appliance is not suitable for animal breeding purposes!
• The instruction leaflet belongs to the appliance and must be kept in a safe place.
When changing owners, the leaflet must be surrendered to the new owner!
THE HEATER CARRIES THE WARNING SYMBOL INDICATING THAT IT
MUST NOT BE COVERED.
Oil filling
• The radiator is filled with an precise quantity of special oil.
• Repairs requiring opening of the oil container are only made by the manufacturer
or his service agents.
• When scrapping the appliance, the oil must be disposed of properly!
• As this is a category 2 oil, it must be disposed of only at waste oil collecting
points!
Packaging
• After unpacking the appliance, check the same for transport damage and the
contents for completeness! In the event of damage or an incomplete delivery,
contact your authorised retailer!
• Do not discard the original box! It can be used for storage and dispatch to avoid
transport damage!
• Dispose of the packaging material in a proper manner! Plastic bags should be
kept away from children!
Location
• The appliance should be placed with a minimum distance of 50cm from flammable
objects, walls or other structures! The appliance openings must not be obstructed
in any way!
• Do not place the appliance on instable surfaces (e.g. a bed), where it can tip
over!
• The appliance must not be located below a socket outlet!
Power cord
• Only use an approved extension cord that is suitable for the appliance rating!
• Position the power cord so that it does not pose a tripping hazard and possibly
cause the appliance to be knocked over.
• The power cord must not come into contact with hot appliance parts!
• Never pull the plug out of the socket at the cord!
• Never move the appliance by pulling at the cord or use the cord for carrying
purposes!
• Do not coil the cord around the appliance! Do not use the appliance with the cord
coiled!
This applies particularly if a cable drum is used.
• Do not crush the cord or drag it over sharp edges. Do not place it over heated
hotplates or naked flames!
Start up
• To use, insert the plug in the socket.
Fitting rollers (see Fig. 2 & 3)
• Before using the appliance, the rollers must be fitted!
• Carefully place the appliance on the floor with the underside facing upwards. The
surface must not be too hard – paint or appliance damage!
• Installing the castors between the outer-most rib on each end of the radiator and
its adjacent rib using the spring clips provided.
• Tighten the wing nuts and carefully turn the radiator back on the rollers.
Indicator light
The pilot light illuminates when the appliance is heating.
Switch (S) (see Fig. 5)
OR110......
OR115......
OR120......
OR125......
Thermostat (T) (see Fig. 4)
In order to maintain a certain room temperature, set the controller to "max.".
Operate the appliance at full power until the required room temperature is reached.
Set back the thermostatic controller until the appliance switches off with an
audible "click". This temperature will be kept almost constant by the thermostatic
control switching on and off automatically.Please note that the appliance can only
be switched on when the thermostat setting is higher then the room temperature.
Fan Heater (TLG) (see Fig.6)
To accelerate room heating, a fan heater with a selector switch (S1) can be
switched on.
Cable storage (see Fig. 1)
Safety in use
This appliance incorporates a number of safety devices. In addition to the
'Important Safety Advice
' section your attentionis drawn to the following:
Tilt Switch;
The tilt switch will prevent the heater from working if it is accidentally tipped over
on its side.
If the radiator is tipped over while it is hot, disconnect the power and allow it to
cool, then stand the radiator back upright. Reconnect the power - normal operation
should be resumed.
Safety Overheat Protection:
The heater is fitted with a thermal safety cut-out which will switch off the
heater should it overheat for any reason. If the cut-out operates it is the
result abnormal overheating, and customer services should be contacted
for further advice - see warranty card for details.
UK
I II
600W 1000W
800W 1500W
1100W 2000W
1250W 2500W