Federal Signal Corporation ELECTRAFLASH 141-012 Hoja De Instrucciones página 13

At this time a brief explanation of the service requested, or the nature of the malfunction,

should be provided.

Address all communications and shipments to:

A. General.

Listed below are some important safety instructions and precautions you should follow:

• Read and understand all instructions before operating this system.

• Any maintenance to the light system must be done with power turned off.

• Any maintenance to the light system must be performed by a trained electrician in accordance

with NEC Guidelines and local codes.

B. Re-lamping.

To change the lamp, proceed as follows:

1. Remove the two screws located at the bottom edge of the dome. Retain these screws.

2. Gently lift dome away.

3. Replace lamp with Federal Signal lamp, Part Number K8107181A.

4. Place the dome over the base. Align screw holes in dome and base. Insert previously

removed screws and tighten.

C. Replacement Parts.

Description

Dome, Amber

Dome, Blue

Dome, Red

Dome, Clear

Dome, Green

Lamp

Flasher

FEDERAL SIGNAL CORPORATION

Electrical Products Division

Service Department

2645 Federal Signal Drive

University Park, IL 60466-3195

SAFETY MESSAGE TO SYSTEM USERS

Part Number

K8263073A

K8263073A-01

K8263073A-02

K8263073A-03

K8263073A-04

K8107181A

K8285238A