• When replacing the Fusing Unit, turn the main power switch off and wait at
least 60 minutes before proceeding with the replacement.
• Do not touch this machine if a lightning strike occurs in the immediate
vicinity. Doing so could result in electric shock.
• The following explains the warning messages on the plastic bag used in
this product's packaging.
• Keep the polythene materials (bags, etc.) supplied with this machine
away from babies and small children at all times. Suffocation can result
if polythene materials are brought into contact with the mouth or nose.
R CAUTION:
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, take care that the power cord is not damaged
under the machine. Failing to take these precautions could result in fire or
electric shock.
• If you have to move the machine when the optional paper tray unit is
attached, do not push on the main unit's top section. Doing so can cause
the optional paper tray unit to detach, possibly resulting in injury.
• The machine weighs approximately 57 kg (125.7 lb.).
• When moving the printer, hold the handles located on both sides, and then
lift it slowly. Lifting it carelessly or dropping it may cause an injury.
• If the lower paper tray is installed, do not pull out more than one tray at a
time when you are changing or replenishing paper or resolving paper jams.
Pressing down forcefully on the machine's upper surfaces can result in
malfunctions and/or user injury.
• Contact your service representative if you need to lift the machine (such
as when relocating it to another floor). Do not attempt to lift the machine
without the assistance of your service representative. The machine will
be damaged if it topples or is dropped, resulting in malfunction and risk of
injury to users.
• Do not look into the lamp. It can damage your eyes.
• Do not hold the control panel while moving the machine. Doing so may
damage the control panel, cause a malfunction, or result in injury.
• Do not pull out paper trays while moving the machine. Doing so may
damage the control panel, cause a malfunction, or result in injury.
7