Crosstour CT8500 Manual Del Usuario página 13

SETTINGS
Press four times the Power/Mode Button after power on to enter Settings Menu. Press the
UP or Down Button to cycle through the various options, and press the Shutter/OK Button to
select desired option. Press the Power/Mode Button to cycle through Video setting, Photo
setting, General setting, System setting and Exit.
Video Setting
Video Resolution: 4K 30fps/2.7K 30fps/1080p 60fps/1080p 30fps/720p 120fps
The default resolution is 4K 30fps.
EIS: Off/On.
Choose to turn on/off the anti-shake.
Looping Video: Off/1 Min./3 Min./5 Min.
When the fonction is turned on, the video recorded will be segmented at the time you set.
Time-Lapse Video: Off/1 Sec./5 Sec./10 Sec./30 Sec./60 Sec.
The video recorded will be compressed to the time length you set. For example, an image of
a scene may be captured once every second, then played back at 30 frames per second; the
result is an apparent 30 times speed increase.
Slow Motion: Off/1080P/720p
Audio Record: Off/On. Choose On to record audio in your video.
The default setting is On.
Photo Setting
Photo Resolution: 16M/12M/8M/5M
The default resolution is 16M
Time-Lapse Photo: Off/2 Sec./10 Sec.
After pressing Shutter/OK Button, take a photo after the time you set.
Burst Photo: Off/3 photos/5 photos. The default setting is Off.
Press the Shutter/OK Button once to take a few pictures in a row. When this setting is on, the
setting Time-Lapse Photo will be turned off automatically.
General Setting
Volume: 0~10
Adjust the sound while viewing videos and pressing buttons.
9