Video Mode - Crosstour CT8500 Manual Del Usuario

Upside Down: Off/On
When this setting is turned on, the camera's screen flips up and down.
Screen Saver: Off/30sec./1min./3min.
After a set period of time, if there is no operation on the camera, the screen will automatically
go black. At this point the camera does not turn off, you can press any button to light the
screen.
Format: YES/NO
Format the memory card in the camera. Once this operation is implemented, all date will be
deleted. We recommend you to format your memory card in the camera befor use.
Reset: YES/NO
Restore all camera settings to default settings.
FW Version: Firmware version of the camera
Exit
Press the shutter button to exit the settings.

VIDEO MODE

Video:
There will be a video icon on the upper left corner of the camera screen. Please confirm that
you have set up your video settings. If the Video icon in your camera's LCD is not shown, press
the Power/Mode Button repeatedly to the setting menu and select the desired option in the
Video Setting (such as Looping Video/Time-lapse Video/Slow Motion etc).
To Start Recording:
To press the Shutter/OK Button. The camera Status Light(Blue) on the left of screen and a
Red Dot on the screen will flash while recording.
Tipss: If the camera starts recording automatically after power on, please check if you have
turned on Car Mode.
To Stop Recording:
To press the Shutter/OK Button again. The camera Status Light(Blue) on the left of screen
and the Red Dot on the screen stop flashing to indicate the recording has stopped.
To Turn On/Off the audio record:
To press the Down Button. The MIC icon will show the status on the lower right corner of the
screen.
Time-Lapse Video:
If you turn on the Time-lapse video in Video setting, there will be a clock icon at the top of the
camera screen. The number displayed on the icon is the time of the video compression you
set.
11