Bosch Rexroth KE350 Manual Del Usuario página 30

30/120 Bosch Rexroth AG
USB host interfaces (X3U4) (KE350G IL)
This interface is designed as a type A socket.
It fulfills the requirements in USB
specification 2.0.
This interface serves as a USB return
channel for the touchscreen/mouse. For this,
the device connected to the return channel
must behave like a USB mouse. The total
current for all the USB host interfaces (X3U1,
X3U2 and X3U4) may not exceed 1 A.
1 2 3
Fig. 3: USB socket, type A
Tab. 3: X3U4 assignment
Pin Signal Description/
function
1 VCC 5 V supply
2 USB_Data– Send USB data
3 USB_Data+ Receive USB
data
4 GND Reference
potential for all
voltages
4
Voltage/
current
5 V= /
0.5 A
PE
potential
KE350/KE350G IL | 3 609 929 B62/2009-02
DVI interface (XDVI) (KE350G IL)
This interface is intended for the connection
of an external monitor. It is designed as a
socket in accordance with the Single Link
Digital DVI specification.
You can connect a DVI monitor with the
following resolutions:
– VGA (640 x 480)
– SVGA (800 x 600)
– XGA (1024 x 768)
It is not possible to connect a VGA monitor
via an interface adapter.
1 2 3 4 5 6 7 8
9 10 11 12 13
17 18 19 20 21 22 23 24
Fig. 4: DVI socket
For DVI socket assignment, please refer to
Table 4 on page 31.
C1 C2
15
14 16 C5
C3 C4