Transport And Storage - Bosch Rexroth KE350 Manual Del Usuario

3 609 929 B62/2009-02 | KE350/KE350G IL
USB device interface (X3U3)
This interface is intended for the connection
of a PC for programming and
parameterization. It is designed as a type B
socket. It is also compatible with USB 2.0
(maximum data rate of 3 Mbit/s).
2
3
Fig. 7: USB socket, type B
Tab. 8: X3U3 assignment
Pin Signal Description/
function
1 USB_S_VBUS 5 V supply
from PC acti-
vates the in-
terface
2 USB_S_Data– Send USB
data
3 USB_S_Data+ Receive USB
data
4 GND Reference po-
tential for all
voltages
1
4
Voltage/
current
5 V= /
0.5 A
PE poten-
tial
Bosch Rexroth AG
Slot for the mass storage (X6C1)
This interface is intended for the use of the
CF350 mass storage.
ATTENTION
Damage due to improper assembly!
Damage to the connections
y Only use mass storage from Rexroth.
y Insert the CF350 mass storage into the
KE350/350G communication unit with
the plug-in connections facing the front,
so the "Rexroth" product label (front
side of the card) is visible.
5

Transport and storage

For storing and transporting the product,
always observe the ambient conditions
specified in the technical data (see
"Technical data" on page 39).
33/120