Milwaukee HDE 13RQ Manual De Instrucciones página 7

drilling in non-ferrous metals such as cop-
per, brass, or aluminum. Back the material
to prevent binding and distortion on break-
through.
NOTE: Keep the speed low enough to pre-
vent burning the bit.
WARNING!
To reduce the risk of personal injury
and damage to the tool, hold the tool
securely. Brace tools with side
handles as shown. If the bit binds, the
tool will be forced in the opposite
direction. Bits may bind if they are
misaligned or
through a hole. Wood boring bits can
also bind if they run into nails or knots.
G
Bracing Against A Stud
15 - Reaction
16 - Reverse rotation
17 - Forward rotation
H
Bracing Against Your Leg
18 - Reaction
19 - Forward rotation
I
Bracing Against The Floor
20 - Forward rotation
21 - Reaction
1. When starting a hole, place the drill bit
on the work surface and apply firm
pressure. Begin drilling at a slow
speed, gradually increasing the speed
as you drill.
2. Always apply pressure in line with the
bit. Use enough pressure to keep the
drill biting, but do not push hard enough
to stall the motor.
3. Reduce pressure and ease the bit
through the last part of the hole. While
the tool is still running, pull the bit out
of the hole to prevent jamming.
when breaking
Maintenance
WARNING!
To reduce the risk of injury, always
unplug your tool before performing
any maintenance. Never disassemble
the tool or try to do any rewiring on the
tool's electrical system. Contact a
MILWAUKEE service facility for ALL
repairs.
Cleaning
WARNING!
To reduce the risk of injury, electric
shock and damage to the tool, never
immerse your tool in liquid or allow a
liquid to flow inside the tool.
Clean dust and debris from vents. Keep
the tool handles clean, dry and free of oil
or grease. Use only mild soap and a damp
cloth to clean your tool since certain clean-
ing agents and solvents are harmful to plas-
tics and other insulated parts.
Repairs
Use only identical MILWAUKEE replace-
ment parts. Always take the tool to an au-
thorized MILWAUKEE service center for
repairs and maintenence.
5 English