Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
before using your Kenwood
attachment
Read these instructions carefully and
G
retain for future reference.
Remove all packaging including the
G
plastic blade covers from the knife
blade. Take care the blades are
very sharp. These covers should
be discarded as they are to protect
the blade during manufacture and
transit only.
key
pushers: large and small
feed tube
attachment lid
finger grip
knife blade
attachment bowl
connector
cutting discs
before using for the first time
Wash the parts see 'cleaning'
G
to use the knife blade
Use the knife blade to chop raw and
G
cooked meat, cooked eggs,
vegetables, nuts, pâtés and dips and
to also make crumbs from bread
and biscuits. It can also be used to
make shortcrust pastry and crumble
toppings.
1 Place the mixer on the work surface
with the speed control facing the
front.
2 Lift off the medium speed outlet
cover
.
3 Place the connector onto the outlet
with the triangle M facing towards
you and turn clockwise until it locks
into position.
4 Place the bowl onto the connector
with the handle at the back of the
mixer then turn clockwise to lock in
place.
5 Place the knife blade in the
attachment bowl. Turn and push
down if necessary to locate.
Handle the knife blade with
care - the blades are
extremely sharp. Hold by the
finger grip.
6 Cut the food up and place into the
bowl ensuring it is evenly distributed.
7 Fit the lid onto the bowl by placing
the feed tube behind the handle then
push down and turn clockwise to
lock in place. The lid can be fitted in
four different positions.
If you experience difficulty in
G
fitting the lid, remove the
attachment and switch on the
mixer briefly. Refit the
attachment.
8 Fit the pushers.
9 Switch on. When using the knife
blade use speeds 2 to 5 and
process until the desired result has
been achieved.
10 Switch off and unplug.
11 Remove the attachment from the
mixer by turning anti-clockwise and
lifting off. Dismantle the attachment.
(To remove the bowl from the
connector, hold the base of the
connector and turn the bowl anti-
clockwise and lift off
experience difficulty in removing the
connector from the bowl, refit the
bowl and connector to the mixer.
Turn the assembly anti-
clockwise until it reaches a stop,
then turn the bowl further to unlock
from the connector
hints
Cut food up before placing into the
G
bowl. Meat, bread, vegetables and
other foods of a similar texture
should be cut into cubes
approximately 2cm/
should be broken into pieces and
added down the feed tube whilst the
machine is operating.
If you want to blend soups, drain the
G
ingredients and add the solids to the
bowl. Process and then add back to
the liquid.
When making pastry, use firm fat cut
G
into 2cm/
3
⁄
4
Mix with the flour until breadcrumb
stage is reached. Gradually add
sufficient water down the feed tube
to form a dough. Switch off
immediately ingredients combine
together.
4
. If you
.)
⁄
in. Biscuits
3
4
in cubes from the fridge.
Publicidad
Tabla de contenido
