Fujitsu KVM Serie Manual Del Usuario página 35

Locking and unlocking user accounts
If a user enters an invalid password five consecutive times, the Security Lock-out
feature, if enabled, will temporarily disable that account.
All accounts (User, User Administrator and switch administrator) are subject to this lock-
out policy.
A Switch Administrator can specify the number of hours (1 to 99) that accounts
will remain locked. When Enable Lock-outs is unchecked, the Security Lock-out
feature will be disabled and no users will be locked out.
If an account becomes locked, it will remain locked until the duration time has
elapsed, the switch is power cycled or an administrator unlocks the account. A
User Administrator may only unlock user accounts, while a Switch Administrator
may unlock any type of account.
To enable or disable the Security Lock-out feature:
1. Click the Configure tab in the OBWI, then click the Users category in the left
column.
2. Select the Enable Lock-outs checkbox and enter a lock-out duration if
necessary.
Disabling Security Lock-out will have no affect on users that are already locked out.
To unlock an account:
1. Click the Configure tab in the OBWI, then click the Users category in the left
column.
2. Select the checkbox next to the username you wish to unlock.
3. Click the Unlock button. The lock icon next to the username will disappear.
To specify the length of time a user account remains locked:
1. Click the Configure tab in the OBWI, then click the Users category in the left
column.
2. Click to enable the Enable Lock-outs checkbox.
3. Type the number of hours that a user will be locked out (1 to 99).
Only switch administrators may specify lock-out parameters.
590-1035-640A
4.3 The Explorer Window
29