Lcd Display; Cleaning, Maintenance And Servicing - GCE OC Serie Manual Del Usuario

8 . When you are not using the oxygen concentrator, press the power switch to the Off [O]
position to turn off the power.
OPERATION MODES AND LCD DISPLAY GUIDE
MODE
Start within
EN
5 minutes
Continuous
operation
Timed setting Set the length of your treat-

3 . CLEANING, MAINTENANCE AND SERVICING

Always press the power switch to the Off [O] position and unplug your OC Series Oxy-
gen Concentrator before cleaning .
The exterior of your oxygen concentrator should be cleaned weekly using a damp cloth
with a mild household cleaner. Always wipe the exterior dry after cleaning.
Your cannula and humidifier must be cleaned and replaced as instructed by the manufac-
turer or your home oxygen provider.
You must clean the air filter in the OC Series Oxygen Concentrator at least once a week.
1. Open the access panel to the air filter to the side of the oxygen concentrator
2. Remove the air filters from the device
3. Rinse and allow to dry naturally
4. Once dry, reinstall the air filters
Maintenance and Servicing
The device has no user-serviceable parts, and must only be serviced by an authorized
provider.
GUIDANCE
In the first five minutes of
operation, the oxygen purity
indicator, hour, minute and
separator flicker at the same
time.
The LCD indicates elapsed
time and current run time.
ment by pressing the up
and down buttons on the
button board to increase
or decrease the duration in
10-minute increments.
20 seconds after setting
your treatment duration,
the timer will automatically
begin to count down to the
end of your treatment. The
oxygen flow will stop once
the timer runs out.

LCD DISPLAY

Model OC-S has no oxygen indicator
8/167
Model OC-E