Festo 8106688 Especificaciones Técnicas E Instrucciones Para El Montaje página 22

MPS ® Trolley for Industrial Robots
The trolley is sturdily constructed from welded sheet metal. All the surfaces are painted. Passages in the
side walls and the bottom enable orderly routing of tubes and cables. The four swivel casters are mounted
on the underside of the trolley with an offset, so that the swivel casters will not lock up even when other
trolleys are connected. Two of the swivel casters are equipped with a parking brake. The grip openings on
the side walls are fitted with edge protection.
®
MPS trolley, side view
The control console can be mounted on one side of the MPS
for the electrical connections and the PLC rack on both sides of the trolley.
The profiles for DIN A4 mounting allow additional EduTrainer
attachable doors protect the equipment inside.
22
®
MPS
A height adjustment of the profile plate cannot be mounted on the MPS
industrial robots (order no. 8106688).
trolley, front view
® trolley. There is space for the assembly board
units to be used on the trolley. Optional
®
®
MPS trolley, back view
® trolley for
© Festo Didactic 8111134