Carrier 40VCB217FQEE Manual De Instalación Y Propietario página 14

Software Operation instructions
The right side of the page will display the detailed parameters of the selected indoor units; there are also three keys
that allow the selection of the indoor units by the building, floor, and user.
Display showing indoor unit operation states; different colours represent the different operation states
OFF Eqlp tault ON Comm taulp
Click the indoor unit, the right side will show the detailed parameters of the indoor unit, which will have three keys show: ,
you can select this indoor unit mode to "Normal mode", "Cool only mode" "Heat only mode"
When set to "Normal", the indoor unit can work for all operation modes When set to "Cool", the indoor unit can set the mode
to auto, cool, dry, fan. When set to "Heat", the indoor unit can set the mode to auto, heat, fan.
If the mode setting is success, will have the successful tips display. And the setting mode also will display at the indoor
parameter area.
Double-click the indoor unit to change the view to the indoor unit operation view; you can then select he indoor unit
parameter and click the key to send the command.
12