Carrier 40VCB217FQEE Manual De Instalación Y Propietario página 26

Software Operation instructions
Fill in the bus address, port, gateway address, and position information; click 'Add bus' to create new information.
Bus address: the default IP address of the serial to Ethernet converter is 192.168.1.102
Port: the port number of the serial to Ethernet converter (1–4) Gateway address: the communication address of the protocol
converter
Position: the system installation position
2. Indoor unit collocation
Add the indoor unit information. Click on 'Add indoor' to create a new indoor unit; you can click on 'delete' to cancel the
created indoor unit. After the completion of 'add indoor', the MAC mini has to be restarted to display the newly added indoor
unit normally.
Bus/GW: select the converter of the indoor unit (displaying X–Y, X stands for serial–
Ethernet converter port, Y stands for protocol converter address) Indoor from: the select start indoor unit address
Indoor to: the select end indoor unit address
Model: select the indoor type (including cassette, convertible, duct, and high wall; it can be edited by double clicking)
Building: the building name
Floor: the floor number where the indoor unit is located
User name: the user name where the indoor unit is located (it can be edited by double clicking)
Room No.: the room number where the indoor unit is located (it can be edited by double clicking)
24