Federal Signal LSWB Manual De Instrucciones

Model LSWB
Wall Mounting Kit for 4X, Safe Areas
Warranty: This product's limited warranty can be found at www.fedsig.com/SSG-Warranty.
Limited
Messages to Installers and Users
and follow all safety instructions. Failure to do so may result in property damage, serious injury, or
death.
• Read and understand instructions before installing or operating equipment.
• To avoid electrical shock hazards, do not connect wires when power is applied.
Overview: LSWB wall mounting kit allows a user to install a Federal Signal pipe mount warning light to a
horizonal or vertical surface. The kit is supplied with a surface mount weatherproof box. Model LSWB is
ideal for use in 4X, IP66, and indoor or outdoor applications.
B
D
Installation
Unpacking the Device: After unpacking the device, examine it for damage and verify parts. The Unit
comes with: (1) LSWB wall bracket, (1) WB weatherproof backbox, and (2) hardware kits. If a part is
missing or damaged do not attempt to install. Contact Federal Signal Customer Support at
+1 708-534-4756 or iordersup@fedsig.com.
Product should be installed to code by a licensed electrician
C
E
Item
Description
A
121SLED (Sold Separately)
B
1/2 NPT Conduit, 3" Long
C
Bushing, 3/4" NPT x 1/2" NPT
A
D
#8-32 Mounting Screws
E Nylon Screw Collars
F Cast Wall Bracket
G
3/4" NPT Conduit Plug
H Weather-proof Back Box
I
1/2" NPT Conduit Plug
F
I
G
H