Safety Instructions; Important; Description; Monitor - Extel Levo Instrucciones De Uso E Instalación

1. SAFETY INSTRUCTIONS

Important!

• Please read the user guide carefully before installing or using this product.
• If you are installing this product for someone else, remember to leave the manual or a copy of it for the end user.
Warning:
• The different elements are only to be dismantled by an authorised technician.
Safety instructions:
• To safely use this system it is essential the fitters, users and technicians follow the safety procedures described in
this manual.
• Specific warnings and warning symbols are displayed on the components if necessary.

2. DESCRIPTION

(fig 1)
1 •

Monitor

2 • Wall mounting 3 • Modular power supply 4 • Outside station with its rain shield
5 • 5 RFID badges (for LEVO Access only)
Generality
This videophone consists of an interior unit with a screen and an outside station making it possible to see
and speak to the visitor who has rung. The installation is easy as only 2 wires are needed for all the functions:
buzzer, video image, intercom, door opener and automation. To make the most of the videophone, please read this
instruction manual carefully

3. NOMENCLATURE

a. Monitor
(fig. 2)
1. Loud speakers to hear the visitor at the outside station
2. 7" colour capacitative touch screen (18 cm).
3. SD card port (max 32Go) not included (DO NOT SELECT AN SD MICRO CARD + ADAPTER)
4. Microphone to speak to visitors at the outside station
5. Power on indicator (Fixed blue LED) and missed messages (flashing blue indicator)
6. Screen ON/OFF button
7. Flange notch
8. Terminal block for 17VDC modular power supply
9. Non removable terminal block to connect the wires
b. Outside station
(fig. 3)
1. Infrared LED for better visibility in the dark (light invisible to the naked eye).
2. Directional C-MOS camera lens (behind the outside station)
3. Loud speaker to listen to the host from the monitor
4. Call button: when this button is pushed the ring tone is heard inside. The connection is made between the
outside (outside station) and the inside (the monitor)
5. Luminous name holder (the name holder is automatically back-lit depending on the light levels). To change the
label in the name holder, gently lift the plastic cover using a small screwdriver and slide the label out.
6. Microphone to speak to the host at the monitor
7. Fixture screws
8. Camera lens adjustment holes (at the back of the outside station)
9. Non removable terminal block to connect the wires
10. Dusk sensor (turns on the IR LEDS when night falls)
c. Extra camera (option)
(fig. 3bis)
1. Infrared LED for better visibility in the dark (light invisible to the naked eye).
2. Directional C-MOS camera lens
3. Support
4. Rainshield
CFI EXTEL LEVO - LEVO ACCESS - 03/2017
GB2