Safety Instructions; Technical Features - Extel WEPA 201 LC Guía De Instalación Y Utilización

OPERATION
When pressing the call button on the roadside panel, the handset
produces a "Ding-dong" typed sound signal•The sound of the ringing
can be set on two positions•Upward loud ringing, downward low
ringing•Pick up the handset to talk to your interlocutor•Press the
button to control the gate opener•Hang up the handset to finish
the conversation.•The strike may be activated at any moment without
calling from the roadside panel. Important : if you try your product
before installing it, be sure not to do it with the
roadside panel and the handset in the same room, otherwise the
door phone will produce a shrill sound (Larsen effect).
OPTIONS
All EXTEL electrical strikes : WECA90201, WECA90301, WE905H,
WE905V•All EXTEL electrical locks : WE5001/2, WE5002/2,
WE5003/2 and 5004/2•All EXTEL motors : WEATV2, WEATB2 and
WEATC2•The interface relay : WE 8111 Bis.

SAFETY INSTRUCTIONS

The supplied transformer must be imperatively plugged into a
socket compliant with standards in force (NFC 15-100 for France).
Do not install this transformer outside or in a humid premise.

TECHNICAL FEATURES

•Roadside panel : Working temperature : -10 / +40 °C approx.
•IP44 protection Index•Front panel dimensions (mm) :
100x153x28•Electroluminescent nameplate
•Handset : Power supply 15 VDC•Power consumption 6
Watts•Dimensions (mm) 100x210x70.
•Power supply adapter : 230 VAC / 15 VDC - 1000 mA
INFORMATION FOR USERS
•The guarantee may be voided if you open the device.•For any
return to after sale service, protect the kit elements to avoid
scratches.•Only use a soft cloth, do not use solvents.
MALFUNCTION
• No sound from outside to inside : the screw cap (G) is improperly
positioned • The handset constantly rings : the wires between the
handset and the roadside panel are reversed • Bad quality sound : link
wires between the handset and the roadside panel are in the same sheath
as high current wires.
www.cfi-extel.com (section technical assistance)