Safety Instructions; Description; Components; Monitor - Extel Entry Instrucciones De Uso

1. SAFETY INSTRUCTIONS

Important !
• Please read the user manual thoroughly before installing or using this product.
• If you install this product for other people, please give the manual or a copy to the end user.
Warning :
• The different elements can only be dismantled by an authorised technician.
Safety instructions :
• To safety use this system, it is essential the fitters, users and technicians follow the safety procedures described
in this manual.
• Specific warnings and caution symbols are indicated on the elements if necessary.
• Installation according to the standards applicable in the country where this product is installed (NF C 15-100 for
France).

2. DESCRIPTION

1 • Monitor 4 • Outdoor station
2 • Wall mounting
3 • Mains adapter
Generality
This videophone consists of an interior unit with a colour, liquid crystal display screen, a free hand interphone, and
a surface-mount exterior outdoor station which makes it possible to see and speak to the visitor who as rung. To
make the most of the videophone, please take the time to read this instruction manual thoroughly, and do not
lose it.

3. COMPONENTS

a. Monitor
(fig. 2)
1. Orange indicator light: powered on. Off: monitor not powered on or protected (p3)
2 Control screen showing a view of the visitor's face 10 cm 4" colour.
3. Reshow the image.
4. Communication with the outdoor station.
5. Control for automatic gate opening mechanism: press this key to open the automatic gate opening mechanism.
6. Strike or electric lock control: press this key to open the strike.
7. Microphone to communicate with the visitor.
8. Speaker.
9. Terminal blocks to connect the wires from the outside station.
10. Terminal blocks to connect the two 17 V
with applicable standards: NFC 15-100 in France).
Take care to observe proper polarity.
11. Holes for wall mounting.
12. Selection of the ring tone
13. Brightness adjustment.
14. Contrast adjustment.
15. Ring tone volume adjustment.
b. Roadside panel, external camera
1. IR LED for better visibility in the dark (light invisible to the naked eye).
2. C-MOS camera
3. Loudspeaker: allows you to be heard outside.
4. Call button: when this button is pushed, the bell sound is heard inside. The screen and the camera are activated.
5. Lit name holder (automatic back-lighting of the name holder depending on the amount of daylight). To change
the label in the name holder, gently lift the plastic cover (8 Fig 4) using a small screwdriver and slide the label out.
(fig 1)
adapter wires (adapter to be connected to an installation compliant
(fig. 3)
CFI EXTEL ENTRY - 11/2016
GB2