Publicidad
to exit the programming mode, bring
the jumper J1 to position A.
Return to operation mode
Once you have completed programming,
bring the jumper J1 back to A; the display
shows "ACI FARFISA / press < >" or the
text you have entered during
programming (see "Personalisation of
display initial text").
Table of system programming codes
Programming
Function description
code
bit 0
door lock activation time
bit 1
activation upon call from internal station (1)
bit 2
door lock activation with
bit 3
deactivation of tone generator on the external door station
bit 4
activation of personalised initial screen (3)
bit 5
deactivation of ACI FARFISA and activation of personalised text
bit 6
reserved; do not program
bit 7
reserved; do not program
(1) This function allows the internal stations to press the
external stations in parallel the connection is established with the last calling door station) and activate the door lock by
pressing the button
(2) This functions allows for quicker door lock activation by pressing
+ password +
.
(3) You can alternate "ACI FARFISA" with the personalised text (see "personalisation of display initial text").
(2)
.
button, start a conversation with the external station (in case of more
rather than dialling the code 00+
Value entered with buttons
= 0
= 1
3 sec
6 sec
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
-
-
-
-
. For example: press
15
Mi 2311/1
Publicidad
