Service Parts - Broan QT140LE Manual De Instrucciones

8. Push grille
against ceiling.
9. Remove light
lens.
Carefully insert a small
flat-blade screwdriver
between grille and
lens. Pry lens out.
10. Install light
bulbs.
Product includes (2)
18W (max.), type GU24
fluorescent bulbs with
M.O.L. (maximum
overall length) of 3.9"
(100mm) as illustrated
below.
Product includes a
4W (max.), type C7
incandescent night light
bulb.
Insert bulbs into their
sockets. Replace lens.

SERVICE PARTS

Key No. Part No.
1 97016466 Housing
2 97018562 Duct Connector - 6"
3 98010102 Wiring Plate
4 99170245 Screw, #8-18 X .375
5 97018011 Wire Panel/Harness Assembly
6 97016926 Blower Assembly
7 97018832 Grille Assembly
8 99140199 Grille Spring (2 req'd)
9 99111400 Lens
10 97018014 Spacer (2 supplied)
11 99420665 Thumbscrew, #8-18 x .375
12 475 Duct Reducer - 6" to 4"
13 99271381 Bulb, GU24, 18W Fluorescent (2 req.)
14 99271426 Bulb, 4W, Type C7 Night Light
Order service parts by "Part No." - not by "Key No."
3.9" (100mm) M.O.L.
Description
(includes key nos. 8 & 9)
SERVICE NOTE
To remove
Blower Assembly:
Unplug motor.
Remove
thumbscrew (11)
from motor plate
flange.
Find the single
TAB on the
motor plate
(located next to
the receptacle).
Push up near
motor plate tab
while pushing
out on side
of housing.
Or insert a
straight-blade
screwdriver into
slot in housing
(next to tab) and
twist screwdriver.
Replacement parts
can be ordered on our
website. Please visit
us at www.broan.com
MODEL QT140LE
Page 4
99044874A