Technical Specifications; Assembly - Yard force YF22-HWT Manual Del Operador

TECHNICAL SPECIFICATIONS

Engine type
Engine displacement
Engine speed
Cutting path
Cutting height
Trimmer Line
Wheel diameter
Read and follow the assembly and adjustment instructions. Do not discard any parts or materials unit the
unit is as assembled.
NOTE: Torque is measured in foot-pounds (metric unit is Nm).The measurement describes how
tight a nut or bolt must be .The torque is measured with torque wrench.
WARNING Always wear ANSI compliant safety glasses or eye shields while assembling the
trimmer.
WARNING
Before doing any assembly or maintenance to the unit , remove the wire from the spark plug.
ADJUST THE HANDLE
1. Adjust knobs until the ratchet teeth are disengaged .Do not remove the handle adjustment knobs(See
Fig. 3).
2. Pull sides of handle apart and rotate the handle to the desired position behind the trimmer.
3. Stand in the operator's position behind the trimmer to make sure handle is adjusted to a comfortable
position.
4. Tighten the handle adjustment knobs.
5. To attach the recoil start handle to rope guide, twist the rope through the rope guide mounted on the
right side of the handle.
Hotline: 1-866-902-9690
TECHNICAL SPECIFICATIONS
Single cylinder 4-stroke
163cc
3100±100RPM
22"(56cm)
1.5"-3"(38-76mm)
0.155"(4 mm)
14"

ASSEMBLY

9