Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8
9
10
Insert the power plug into the power outlet and your installation in complete. Press the
on/off switch for power and control the brightness of the pucks with the dimmer control
knob on power control unit.
Troubleshooting Guide
Minor problems often can be fixed without the help of an electrician. Before doing any work on the
fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
Problem
Fixture doesn't light
Fuse blows or circuit breaker
trips when light is turned on
Cleaning Instructions
Your fixture is made from quality materials that will last for many, many years with minimum
care. You may want to periodically clean the fixture using a mild, non-abrasive glass cleaner
and soft cloth. Do NOT use solvents or cleaners containing abrasive agents. When cleaning
the fixture, make sure you have the power turned off and do not spray liquid cleaner directly
onto the fixture, connection sockets, linking cord plug or switch.
Replacement Parts List
Keep this guide handy for
ordering replacement parts.
Need Help?
In the event you are missing a part or have questions regarding installation
please visit our website at www.goodearthlighting.com/support.html or
call the Customer Care Center 1-800-291-8838, 8:30 a.m.-5 p.m., CST, Monday-Friday.
Ecolight™ Lighting Warranty
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of (3) years from the date of original
purchase by the consumer. We will repair or replace (at our option) the unit in
the original color, and style if available, or in a similar color and style if the
original item has been discontinued, without charge. The manufacturer warrants
the LEDs for 3 years, providing the fixture is not used in a commercial application
where it is on 24 hours per day, but is used in a residential environment for 3-5
hours per day. Defective units must be properly packed and returned to the
manufacturer with a letter of explanation and your original purchase receipt
showing date of purchase. Call 1-800-291-8838 to obtain a Return Authorization
number and an address where to ship your defective product. Note: No C.O.D.
shipments will be accepted. The liability of the manufacturer is in any case
limited to replacement of the defective light fixture product. The manufacturer
will not be liable for any other loss, damage, or injury which is caused by the
product. This limitation upon the liability of the manufacturer includes any loss,
damage, or injury which is (I) to person or property or otherwise; (II) incidental or
consequential in nature; (III) based upon theories of warranty, contract,
negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related
to the sale, use, or repair of the product. This warranty gives you specific rights,
and you may also have other rights which vary from state to state.
Ecolight Lighting, Inc., 5260 Capitol Drive, Wheeling, IL 60090
Once power control unit, power hub, and pucks are mounted,
plug the puck connector cords into the power hub. Repeat for
each LED puck being installed (maximun of six pucks).
Any excess hanging cords can be secured using the cord
clips provided in your installation kit. Use caution when
attaching the cord clips to the cabinet to insure that the metal
nail does not pierce the cord.
Cause
Power is off
Bad plug connection
Bad switch
Crossed wires or power wire
is grounded out
Hardware Kit
HDW9163BAL
3 YEAR LIMITED WARRANTY
- 3 -
Solution
Check if power supply is on
Check wiring
Test or replace switch
Check wiring connections
Printed in China
Publicidad
Tabla de contenido
