Troubleshooting Guide - ecolight AC1041-AL3-03LF3-E Manual Del Usuario

5
6
7
8
9
10
Insert the power plug into the power outlet and the installation in complete. Press the
on/off switch for power and control the brightness of the pucks with the dimmer control
knob on the power control unit.

Troubleshooting Guide

Minor problems often can be fixed without the help of an electrician. Before doing any work
on the fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
Problem
Fixture doesn't light.
Fuse blows or circuit breaker
trips when light is turned on.
Care and Maintenance
IMPORTANT: This light fixture uses light emitting diodes (LEDs) to provide
light. LEDs do not have a filament to burn out like a traditional light bulb.
LEDs gradually emit less light over their lifetime, but will typically last 36,000
hours in a residential environment.
Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner
and soft cloth. When cleaning the fixture, make sure the power is turned off.
Do not spray cleaner directly onto any part of the fixture or LEDs.
Replacement Parts List
Keep this guide handy for
ordering replacement parts.
Need Help?
In the event you are missing a part or have questions regarding installation
please visit our website at
call the Customer Care Center 1-800-291-8838,
8:30 a.m.-5 p.m., CST, Monday-Friday.
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of (6) years from the date of original purchase by the
consumer. The fixture is not warrantied for use in a commercial or retail application.
The warranty is limited to use in a residential environment. We will repair or replace (at
our option) the unit in the original color and style if available, or in a similar color and
style if the original item has been discontinued, without charge. Defective units must be
properly packed and returned to the manufacturer with a letter of explanation and your
original purchase receipt showing date of purchase. Call 1-800-291-8838 to obtain a
return authorization number and an address where to ship your defective product.
Note: C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any
case limited to replacement of the defective light fixture product. The manufacturer will
not be liable for any other loss, damage, labor costs or injury which is caused by the
Hold the power hub up to the mounting surface and mark the
locations for the mounting screws. Dimple the surface with
either an awl, a nail or drill a small pilot hole for the mounting
screws. Secure the power hub to the cabinet with two of the
mounting screws provided.
Hold the power control unit up to the mounting surface and
mark the locations for the mounting screws. Dimple the
surface with either an awl, a nail or drill a small pilot hole for
the mounting screws. Secure the power control unit to the
cabinet with the two mounting screws provided.
The detachable plug on the power control unit connects into
the side of the power hub. This feature allows the pucks and
power hub to be installed inside of the cabinet while the
power control unit and line voltage cord remain outside of the
cabinet. Only a small hole needs to be drilled in the cabinet for
the cord connecting the power control unit and power hub to
pass through.
Once power control unit, power hub, and pucks are mounted,
plug the puck connector cord into the power hub. Repeat for
each puck being installed (maximum of six pucks). The
additional LED add-on pucks (AC1041-AL3-03LF1-E) are not
included.
Any excess hanging cords can be secured using the cord
clips provided. Use caution when attaching the cord clips to
the cabinet to ensure that the metal nail does not pierce the
cord.
Cause
Power is off.
Bad connection.
Bad wall switch.
Discontinue use.
www.goodearthlighting.com/support
Ecolight™ Warranty
6 YEAR LIMITED WARRANTY
Hardware Kit
ZH-AC1041F03-AL3
- 3 -
Solution
Check if power supply is on.
Check cords and/or wiring.
Test or replace switch.
Call customer service.
or