Connect Lance And High-Pressure Hose To Spray Gun; Spray Gun; How To Use Nozzles - DR Power Equipment DPW3800DMN El Manual Del Propietario

Figure 2-9.Connect Water Supply
4. Connect water supply hose to pump water
inlet (A) and hand-tighten.
5. Connect high-pressure hose to pump (B).
Connect Lance and High-
Pressure Hose to Spray Gun
1. See Figure 2-10. Connect lance to spray
gun and hand-tighten.
Figure 2-10.Connect Lance
2. See Figure 2-11. Connect high-pressure
hose to base of spray gun.
Figure 2-11.Connect High-Pressure Hose to

Spray Gun

6
Spray Gun
Become familiar with spray gun trigger and
locking system prior to use.
See
gun and squeeze trigger to learn how trigger
mechanism and locking system can be acti-
vated and deactivated.
B
A
000270
3. Turn ON the water, squeeze the trigger to
purge the pump system of air.
4. Verify spray gun is OFF with lock engaged
before starting power washer.

How to Use Nozzles

1. See nozzle selection guide and select cor-
rect nozzle for task.
2. See
collar and install nozzle.
000120
3. Release quick-connect collar to secure
nozzle.
4. Verify nozzle is locked in place.
000269
Figure 2-12. With unit OFF, hold spray
Figure 2-12.Spray Gun (Typical)
Figure 2-13. Pull back quick–connect
Figure 2-13.Insert Nozzle
Owner's Manual for Power Washer
000123
000125