Technical Data; Definitions: Safety Guidelines; English (Original Instructions) - DeWalt D24000 Traducido De Las Instrucciones Originales

TILE SAW
D24000
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and
e
innovation make D WALT one of the most reliable partners for professional power tool users.
e

Technical Data

Voltage
UK & Ireland (GB/ LX)
Type
Power input (QS, GB/ LX)
No-load speed
Cutting disc diameter
Cutting disc bore
Cutting disc body thickness
Type of cutting disc
Max. peripheral speed cutting disc
Bevel settings
Max. ripping capacity
Dimensions—in use without stand - (L x W x H)
Dimensions – in use with stand (in highest position) - (L x W x H)
Dimensions – in transportation mode (saw) - (L x W x H)
Dimensions – transportation mode (water pans) - (L x W x H)
Depth of cut at 90°
Nominal weight (including cutting disc)
Max. allowable weight (with cutting disc and water)
Noise values and vibration values (triax vector sum) according to EN62841-1, EN12418
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been measured in accordance
with a standardised test given in EN12418 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration
such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
nOtE: This device is intended for the connection to a power supply system with maximum
permissible system impedance Zmax of 0.30 Ω at the interface point (power service box) of
user's supply.
The user has to ensure that this device is connected only to a power system which fulfils the
requirement above. If necessary, the user can ask the public power supply company for the
system impedance at the interface point.
EC-Declaration of Conformity
Machinery Directive
Tile Saw
D24000
WALT declares that these products described under Technical Data are in compliance with:
D
e
2006/42/EC, EN62841-1:2015 + AC:2015, EN12418:2000 + A1:2009, EN ISO 12100:2010.
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information,
please contact D WALT at the following address or refer to the back of the manual.
e
The undersigned is responsible for compilation of the technical file and makes this declaration
on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
D24000
30.10.2020
V 230

Definitions: Safety Guidelines

AC
V 230/115
AC
The definitions below describe the level of severity for each signal word. Please read the
20
manual and pay attention to these symbols.

W 1600/1500
min -1 4200

mm 250
mm 25.4

mm 1.5
straight, non-recessed
(continuous rim)
min -1 5000 
° 22.5/45

mm 610
mm 1270 x 892 x 580
General Power Tool Safety Warnings
mm 1270 x 892 x 1395

mm 793 x 610 x 470
mm 895 x 689 x 116
mm 80
kg 36
kg 51
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
dB(A) 91.8
1) Work Area Safety
dB(A) 101.5
dB(A) 2.5
m/s 2 4.0
m/s 2 0.5
2) Electrical Safety
3) Personal Safety
WALT.
e
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b ) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c ) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c ) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e ) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
a ) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b ) Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal injuries.
c ) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have
the switch on invites accidents.
d ) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e ) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f ) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
g ) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection can
reduce dust-related hazards.
EnGLIsh
29