TECO 680 Manual De Instrucciones página 98

9. Move the wheel to a centred position (P1 or P2).
10. The brake intervenes automatically in the centred position, then apply the balanc-
ing weight indicated on the monitor as described in the chapter "ALU 1P, ALU 2P
programmes".
11. Move the wheel to a centred position (P1 or P2).
12. Repeat the operations in step 10.
13. Once the Hidden Weights programme
procedure is complete, you may con-
tinue working with any other balancing
programme.
Standard alU Programmes
(alU 1, 2, 3, 4, 5)
Standard ALU programmes take into ac-
count the different possibilities of weight application (Fig. 22)and provide correct
unbalance values while maintaining the rated geometric data setting of the alloy wheel.
ALU 1 balancing programme:
calculates statistically the balancing weights to be applied on the
inner part of the rim, as illustrated by the relevant icon.
ALU 2 balancing programme:
calculates statistically the balancing weights to be applied on the
inner side and the inner part of the rim, as illustrated by the icon.
ALU 3 balancing programme:
calculates statistically the balancing weights to be applied on the
inner part (inner and outer side) of the rim, as illustrated by the icon.
ALU 4 balancing programme:
calculates statistically the balancing weights to be applied on the inner side and the inner
part, outer side of the rim, as illustrated by the icon.
ALU 5 balancing programme:
calculates statistically the balancing weights to be applied on the inner part and the outer
side of the rim, as illustrated by the icon.
98
Operator's manual TECo 680 - 680 PlUS - 680 PlUS Pl
21a
22