3 Connect
Make the following connections to use your
Home Theater System.
Basic connections:
•
Video
•
Speakers and subwoofer
•
Power
Optional connections:
•
Radio antenna
•
Audio
•
Audio from TV
•
Audio from cable box/recorder/
game console
•
Other devices
•
Portable media player
•
USB device
•
iPod
•
Attach table stand
•
Mount the Home Theater System
•
Mount the speakers
Note
•
Refer to the type plate at the back or bottom
of the product for identifi cation and supply
ratings.
•
Before you make or change any connections,
ensure that all the devices are disconnected
from the power outlet.
Tip
•
Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your
product is available at www.connectivityguide.
philips.com.
EN
10
Place the Home Theater
System
•
Place the Home Theater System where
it cannot be pushed, pulled over or
knocked down. Do not place it in an
enclosed cabinet.
•
Be sure that you have full access to the
power cord for easy disconnection of the
Home Theater System from the power
supply.
1
Place this Home Theater System near the
TV.
2
Place the speakers system at normal
listening ear-level and directly parallel to
the listening area.
3
Place the subwoofer at the corner of the
room or at least 3 feet away from the TV.
Tip
•
To avoid magnetic interference or unwanted
noise, never place this Home Theater System
too close to any radiation devices.
Note
•
Attach the table stand to this Home Theater
System before place it on a table top. (see
'Attach table stand' on page 17 )
•
Y
ou can mount this Home Theater System
(see 'Mount the Home Theater System' on
page 18 ) .