Declaration Of Conformity - Allett KENSINGTON 14 Instrucciones De Operación

Service
Turfmech Machinery Ltd
Hangar 5 - New Road
Hixon - Staffordshire ST18 0PJ England
Helpline: 0906 633 0934
Calls cost £1.53 per minute + network extras.
Bill payers only - 18+. Calls are recorded.
Provider: A2B, 0870 046 0138
Hours of service are 8am-5pm
Mon-Fri / 10am-5pm Sat-Sun
Web helpline: www.mowerhelp.com
Guarantee
Turfmech Ltd guarantees this product against
manufacturing defects. We will repair (or replace
at our option) if a manufacturing defect occurs
within the guarantee period as long as it has not
been subjected to rental/hire use. The engine fit-
ted to this mower is covered by the engine man-
ufacturer. See engine manual for details.
The guarantee period for domestic use is 2 years
for parts (2 year engine) and 2 year for labour
costs from date of purchase.
For the purpose of this guarantee:
Non-domestic use means all other uses includ-
ing, commercial, income producing, but ex-
cluding rental/hire use.
To obtain a repair under this guarantee:
– Take your lawnmower to a Turfmech Ltd
Approved Service Agent.
– Show your dated proof of purchase.
– Show the guarantee page.
This guarantee does not apply if:
– you cannot provide a dated proof of pur-
chase.
– the product has been resold by original pur-
chaser (this does not apply in the Republic of
Ireland), or has been used under hire.
– the product has been modified to change
the manufacturer's specification, or if non-
genuine spares have been fitted.
– if any previous repair was undertaken by
anyone other than a Turfmech Ltd
Service Agent.
– the fault is due to maladjustment, abuse, ne-
glect or accidental damage.
– the fault is due to lack of lubrication or main-
tenance.
– damage to any part, particularly the drive or
cutting mechanism has been caused by al-
lowing the product to strike solid objects.
– The product develops a fault due to abnor-
mal use.
– Failure is due to normal wear. The following
F016J10015B Page 18
parts are considered as wearing parts. Their
life is dependant on regular servicing and
they are not therefore, normally covered by
the guarantee:
Blades, drive belts, bearings, gears, rubber on
the rear roller and cables.
The cost of routine maintenance of the product
is not covered by the guarantee.
It is in your best interests to follow the Operating
Instructions for your mower/scarifier, as a prop-
erly cared for product should give many years
of excellent service.
Should you require spares always insist
genuine Turfmech Ltd spares.
caused to the product through the fitting of
parts not made or approved by Turfmech Ltd
is not covered by the Guarantee.
Your statutory rights are not affected by this
guarantee.
Your product has been manufactured under an
environmental management
where possible the most environmentally re-
sponsible material and processes, and with the
potential for recycling at the end of its life.
When the time comes to dispose of this product
please consider the environment and take it to
a recognised recycling facility.
(Please contact your Local Authority for loca-
tion information.)

Declaration of Conformity

We: Turfmech Machinery Ltd
Of: Hangar 5, New Road, Hixon, Staffordshire, ST18 0PJ, UK
Declare that equipment: Category 32 petrol lawnmower conforms to the essential
requirements of the following directives and their amendments: 2004/108/EC,
2006/42/EC, 2000/14/EC (the conformity assessment procedure followed was in
accordance with Annex VI of the Directive) and has been designed and manufactured to
the following standards: BS EN 836.
Typically the A-weighted noise level of the product is:
Model number
Kensington 14K (0.35m)
Kensington 17K (0.43m)
Kensington 20K (0.51m)
Vibration emission values (triaxial vector sum) determined according to BS EN 836
Model number
Kensington 14K
Kensington 17K
Kensington 20K
Notified body: AV Technology, Handforth, Cheshire SK9 3RW
Approved
Technical file at: Turfmech Machinery Ltd, Staffordshire, ST18 0PJ
I hereby declare that the products described above have been tested and found to comply
with the relevant sections of the above referenced specifications. The unit complies with
all essential requirements of the directives.
Place: Stafford, March 2012
Signature:
Austin Jarrett
Position: Managing Director
English - 6
Any damage
system using
Sound Measured Guaranteed sound
pressure level Sound power level
BS EN 836 power level 2000/14/EC
81 dB(A) 92dB(A) 96dB(A)
81 dB(A) 92dB(A) 96dB(A)
81 dB(A) 93dB(A) 96dB(A)
Vibration Uncertainty (K)
2 2
5 m/s 2 m/s
2 2
5 m/s 2 m/s
2 2
5 m/s 2 m/s
on