Prebena KTVH-B19D Manual De Instrucciones Original página 92

Faults
Symptom
Triggering is not
possible.
42
Possible cause
The operating
pressure is too low.
The moving parts are
glued together by
lubricants after long
storage.
Corrective actions
 Increase operating
pressure of the
compressed air system
to the maximum
allowable operating
pressure.
 Then trigger several
times.
 When triggered, set the
desired operating
pressure (see page 17).
 Clean and re-oil the
stapler unit (see page
39).
 Setting the maximum
operating pressure.
 Then trigger several
times.
 When triggered, set the
desired operating
pressure (see page 17).
 Otherwise, contact
customer service (see
page 48).