Sharp UX-D50 Manual Del Usuario página 16

Using the Cordless Handset
Making a phone call
1. Pick up the cordless handset and press
.
2. When you hear the dial tone, dial the
number.
3. When you are ready to end the call,
press .
Making a phone call using automatic
dialling
1. Press once.
2.Press or
wish to dial appears in the display.
3. Press .
Receiving a phone call
1. When the cordless handset rings, pick it
up and press
2. When you are ready to end the call,
press .
Receiving a fax using the cordless
handset
If you hear a fax tone after answering a
call on the cordless handset, or if the
other party speaks to you and then
wants to send a fax, press
6
until the number you
.
.
Storing auto dial numbers
1. Press and then press
Enter a name for the auto-dial
2.
number. To enter each letter, hold
down the key for the letter as shown in
the chart below until the letter appears
in the display.
SPACE, PAUSE ( ), - = M, N, O =
A, B, C = P, Q, R, S =
T, U, V =
D, E, F =
G, H, I = W, X, Y, Z =
J, K, L =
3. Press .
4. Enter the full fax/phone number.
To clear a mistake, press
To insert a pause, hold down
" " appears
.
5. Press and then
exit
.
Listening to messages
1. Press and then press
2. Press to listen to all your
messages, or
new messages.
3. While listening, you can do the following:
Repeat a message: Press
Skip a message: Press
Delete a message: Press
message is playing.
Stop playback: Press
4 When finished, press
exit.
twice.
# ( ), ?, _ =
=
.
until
repeatedly to
.
to listen to only your
.
.
while the
.
repeatedly to