Cautions; Faq - TOPDON ВТ100 Manual Del Usuario

Cautions

Use this tester in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Hazardous results could occur if tool is used for purposes not intended.
Before testing, make sure the battery terminals are clean. Grease and
dust could result in inaccurate test results.
Wear eye protection when working around batteries.
Check the insulation layer of the battery clamps is in good condition (no
damage, bareness or disconnection) to avoid electric shock.
Test in a well-ventilated area. Vehicle exhaust contains toxic carbon
monoxide.
Keep hair, hands, and clothing as well as tester leads and cords away
from moving blades and belts.
Keep the tester out of the reach of children.
20

FAQ

Q: Is BT100 able to test vehicle alternator?
A : BT100 can test alternator.
Q: Will BT100 hold last test results in memory?
A : Yes, it will keep the last test results for data review.
Q: Is BT100 able to test motorcycle batteries?
A : It can test 12V battery, between 100 and 2000 CCA. If the motorcycle
battery is within these values, then yes.
Q: How to set the CCA range?
A : You can set the data near to the CCA standard number of your battery.
Q: Can the firmware be updated?
A : BT100 is a basic tool, so a firmware update would not be needed.
Q: Does it test 12V deep cycle batteries?
A : Yes, it does.
21