Operation Introduction - TOPDON ВТ100 Manual Del Usuario

Ocultar thumbs Ver también para ВТ100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation Introduction

The tool is powered by solely the vehicle battery. Connect the RED (+)
Positive Battery Clamp to the (+) positive battery terminal, and connect
the BLACK (-) Negative Battery Clamp to the (-) negative battery terminal.
Ensure that the clamps are securely attached to the correct terminals.
The LED Display will display the message below;
6
Choose your preferable language;
1. Battery Test (for 12V battery)
TOPDON BT100 will test each battery according to the selected actual
system standard and rating marked on the battery.
1.1 Before Test
The engine and all other accessory loads must be
to have accurate results. Turn on the vehicle headlamps for 2~3 minutes
until the battery voltage drops back to normal value if the battery is just fully
charged.
OFF
during test in order
7

Publicidad

Tabla de contenido
loading

Tabla de contenido