OHAUS i-DT61XWE Manual De Instrucciones página 7

9.
Install the indicator on the indicator support and tighten the handles at both
ends, as the following step 1. Tighten the other end of the cable in the sealing
kit and the connector on top of the sealing shell, as the following step 2. Finally,
the entire sealed shell is hung in the two round holes at the upper end of the
scale body as the following step 3.
COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on
the product.
Mark Standard
This product complies with the applicable harmonized standards of
EU Directives 2011/65/EU (RoHS) and 2014/30/EU (EMC). The EU
Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2012/19/EU (WEEE).
Please dispose of this product in accordance with local regulations
at the collecting point specified for electrical and electronic
equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
EN 61326-1
ISED Canada Compliance Statement:
This Class A digital apparatus complies with Canadian ICES-003.
ISO 9001 Registration
The management system governing the production of this product is ISO 9001 certified.
EN-5