Especificaciones De Instalación; Instalación (Típica) De La Placa De Sujeción - RJG LS-B-159-4000 Manual De Producto

ESPECIFICACIONES DE INSTALACIÓN
Drawing Title: LS-B-159-4000-02
INSTALACIÓN (TÍPICA) DE LA PLACA DE SUJECIÓN
**CLAMP PLATE INSTALLATION FOR PINS ≤ Ø0.25 [7.0]; PINS > Ø0.25 [7.0] USE HEAD-TO-HEAD INSTALLATION ON SHEET LS-B-159-40000-04 & -05.**
C
NOTES:
1. CLAMP PLATE APPLICATIONS REQUIRE GUIDED EJECTION
2. EJECTOR AND TRANSFER PIN CONCENTRICITY MUST BE WITHIN 0.030" [0.76] OR
10% OF EJECTOR PIN DIA, WHICHEVER IS SMALLER.
3. ENCLOSED EJECTOR BOX SUGGESTED.
4. DO NOT SCALE PRINT
5. BREAK ALL SHARP EDGES, 0.005 [0.03] R MAX
6. DIMENSIONS IN INCHES [MM], UNLESS NOTED
7. TOLERANCES UNLESS SPECIFIED:
XXX = 0.003 [0.08]
XX = 0.01 [0.3]
10 RJG, Inc.
ANGLES = 3 30
LS-B-159-4000 Single-Channel Sensor Installation—Clamp Plate Installation
C
SECTION C-C
SCALE 1 : 2
Galga Extensométrica Monocanal Lynx ™ 4000 Libra Sensor de Botón LS‑B‑159‑4000 | Manual del Producto
LS-B-159-4000 Electronics Housing
Top of Mold
Description: LS-B-159-4000
Sensor Installation
Drawn: K.J.Brettschneider
Design:
Check: M.Groleau
Date: 11.18.2021