Basic safety instructions
To avoid explosion hazards
Fill the cartridges only with PREBENA PKT series compressors.
Only fill the cartridge with compressed air.
Only fill the cartridge up to the maximum filling pressure of
300 bar.
Do not use or fill any faulty or damaged cartridges.
Do not expose the cartridge to any temperature above 60 °C or to
direct sunlight.
Separate the cartridge from the tool every time before transport.
Keep the cartridge out of reach of children and other unauthorized
persons.
Do not use a cartridge whose last periodic inspection was more
than 10 years ago.
To avoid damage to the cartridge
Never open the cartridge. Always leave repairs to qualified
specialists.
Do not use the cartridge if it has been dropped or is damaged.
Have the cartridge inspected by qualified specialists before
putting it into use again.
Prevent contact of the cartridge with the following substances:
-
aggressive solvents
-
fuels and lubricants
-
acids
-
cleaning agents
-
chemicals of all types.
6