To Use The Cartridge; Check The Condition; To Connect The Cartridge - Prebena KT-1000 Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To use the cartridge

Check the condition

 Check the following points in particular:
-
The valve must not be damaged or dirty or loose fitting.
-
The cartridge must not show any outer signs of damage, such
as dents.
-
The last periodic inspection of the cartridge must not have
been more than ten years ago.
-
The useful service life of the cartridge must not be exceeded.
 Do not connect a damaged cartridge to a device.
 Have a damaged cartridge repaired by PREBENA qualified
personnel before connecting it.

To connect the cartridge

 Take the cartridge out of the transport case.
 Keep the transport case for transporting the cartridge.
The transport of the cartridge is only permitted in the transport
case.
WARNING
There is a risk of explosion when operating a
damaged cartridge.
 Check the condition of the cartridge before
each connection.
 Connect the cartridge only if it is in good
condition.
To use the cartridge
9

Publicidad

Tabla de contenido
loading

Tabla de contenido