Transporting and storing the cartridge
Leave some pressure in the cartridge (2-3 bar).
Before storing or transporting, pack the cartridge in the transport
case or a sturdy shipping carton.
Transport the cartridge to the desired location.
Store the cartridge at room temperature at a location that is dry
and protected against dust.
The cartridge may only be shipped if it is in an empty state
(residual pressure < 2 bar).
The cartridge may only be shipped with a filling pressure > 2
bar if it is marked correspondingly in accordance with the
applicable ADR
Servicing the cartridge
The cartridge must be serviced only by persons who have the
knowledge, skills and experience necessary to do so. All work not
described here must be carried out by the manufacturer's aftersales
service department or by the manufacturer.
Cleaning the cartridge
Clean the valve and the outside of the cartridge and after every
use.
CAUTION
Damage possible by chemicals or impacts.
Transport and store the cartridge so that it
is protected against impacts.
Transport and store the cartridge so that it
is protected from chemicals.
Servicing cartridge
11