Battery Removal - Remington WDF4815C Manual Del Usuario

ENGLISH
, Signs that your foils and cutters need replacing:
• Irritation: as foils get worn, you may experience skin irritation.
• Pulling: as the cutters wear, your shave may not feel as close and you may feel
the cutter pulling your hair.
• Wear through: you may notice that the cutters have worn through the foils.
, TO REPLACE THE FOIL
• Ensure the shaver is switched off.
• Gently push the small plastic area at either end of the foil. The foil should
then easily detach from the head assembly.
• To reassemble, slide the foil into foil bracket and click into position.
• Close the head assembly.
, CAUTION
• Only hold the plastic to prevent damage to the foil.
• Do not press on the foil when replacing.
, REPLACING THE CUTTERS
• Ensure the shaver is switched off and open the head assembly (as above).
• Grasp the cutter between your thumb and forefinger and pull upwards.
• To reassemble the cutter, place onto the oscillator tip. Gently push the centre
of the cutter, until it clicks into place.

BATTERY REMOVAL

• Rotate the battery compartment cap approximately ¼ turn anti-clockwise
then pull off.
• Place the cap back on the unit opposite to how it came off and rotate
clockwise until the cap snaps into place.
• The battery must be removed from the appliance before it is scrapped.
• The battery is to be disposed of safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
6
All manuals and user guides at all-guides.com