Gym Master GM97816 Manual De Instrucciones página 6

ASSEMBLY INSTRUCTIONS
ASSEMBLY TREADMILL
1/ ASSEMBLE THE UPRIGHT POSTS (as picture 1)
Connect the wires before you assembly the upright posts.
Fix each upright post and base frame with
4pcs bolts (M8X15) for each side.
Do not tighten these bolts until the console
frame have been tightened.
2/ ASSEMBLY THE MAIN FRAME(as picture 2)
Put the main frame on the bottom frame.
Fix the main frame with bolts (M10X75) ,then connect the wires well.
3/ ASSEMBLY THE HANDLE BAR (as picture 3 )
Put the handle bar on the upright posts, then connect the wires of the well.
Fix the handle bar with two
bolts (M10X50) like the picture 3.
4/ ASSEMBLY THE CONSOLE AND THE HANDLE COVER (as picture 4)
Connect the wires ,fix the computer on the handle bar with
4PCS bolts(M4X15).
Fix the handle bar cover on the handle bar with 4PCS bolts(M6X20).
Owner's Manual
5/ ASSEMBLY THE EXTENSION TUBE (as picture 5)
Fix the extension tube on the bottom frame with the bolts(M8X45)
And fix the extension tube on the main frame with the bolts(M8X40)
6/ TIGHT ALL THE BOLTS ,THEN FINISH THE ASSEMBLE.
(3)
(5)
5
(2)
(3)
(4)
5