wacaco nanopresso Libro De Instrucciones página 4

INSTRUCTIONS
All manuals and user guides at all-guides.com
1
Unscrew the outlet head.
4
Unscrew the water tank.
7
Position the filter basket
on the top of the scoop.
10
Screw tightly the outlet
head into the main body.
13
Unlock the piston from
its travel position.
4
2
Remove the filter basket.
5
Remove the scoop and
brush from the water tank.
8
Reverse to transfer all the
powder into the filter basket.
Tamp hard with the back of the
scoop and clean up the edge.
MAX LEVEL 80ml
MIN LEVEL 50ml
11
Add boiling water into the
water tank.
Place water tank on level
and stable surface to fill it.
Hold the Nanopresso with
two hands, as showed above.
Start pumping above a cup.
Do not unclips the cup if the
water tank is filled with hot water.
Put back the filter basket on
the top of the main body.
Screw tightly the main body
14
The first 8 strokes the pressure
is built. Pump slowly until all
3
Unclips the cup if needed.
6
Fill the scoop with fine
coffee grounds (8gr).
9
12
onto the water tank.
Avoid burning yourself.
coffee come out.