Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TOP PANEL FEATURES
1
22
2
33
29
24
25
25
26
27
27
1.
EJECT – Press this button to open or close the CD disc tray.
2.
JOG WHEEL – The jog wheel functions differently depending on its current mode.
a) If a track is not playing, the JOG WHEEL will search slowly through a track's frames. To set a new cue
point, rotate the JOG WHEEL then begin playback when you have determined the proper position. Press
CUE to return to that cue point.
b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track. Rotating the JOG
WHEEL clockwise temporarily speeds it up while rotating it counterclockwise slows it down. This is useful
for beat-matching.
c) When the SEARCH button has been activated, rotating the JOG WHEEL will move rapidly through the
track.
d) When the SCRATCH button has been activated, rotating the JOG WHEEL will "scratch" over the audio of
the track, like a needle on a record.
3.
SCRATCH – Activates or deactivates Scratch Mode. While activated, rotating the JOG WHEEL creates a
'scratch' effect. The LED indicator will be blue when Scratch Mode is active. (Note: This feature is not optimal
for searching through long audio passages. For longer searches, activate the SEARCH function.)
4.
SEARCH – Press this button to use the JOG WHEEL to rapidly
scan through the music.
5.
CUE – During playback, press CUE to return to the cue point
and pause the track. Hold down CUE to start playback from the
cue point, and release CUE to return to that point and pause
the track. If the track is paused, use the JOG WHEEL to locate
a new cue point.
6.
PLAY / PAUSE – Plays or pauses the track. (Note: When paused, pressing PLAY will only set a new cue point
if the JOG WHEEL has been moved.)
7.
TRACK SELECT – Selects the track to be played.
8.
FOLDER – Press this button to enter Folder Mode. The folder name will be displayed on the LCD. Here, you
can press and hold the FOLDER button and use the TRACK SELECT buttons to select a folder. Release
FOLDER to enter the selected folder. (When inside a folder, use the TRACK SELECT buttons to select the
track.) Press FOLDER again to exit Folder Mode.
9.
+10 – Press this button to skip through the CD track listing 10 tracks at a time.
10.
LOOP IN – Sets a new cue point or the start point of a loop (a "Loop In" point) during playback.
11.
LOOP OUT – Sets the end point of a loop (a "Loop Out" point) and starts playing the loop. While playing a
loop, press LOOP OUT to release it from the loop and continue normal playback.
12.
RELOOP – Plays the track immediately from the beginning of a loop (and reactivates the loop).
13.
PITCH – Activates or deactivates the PITCH FADER. You can also hold down this button and press either of
the PITCH BEND –/+ buttons to adjust the range of the PITCH FADER (±4%, 8%, and 16%). The current range
will be indicated on the LCD and by different LED colors.
14.
PITCH FADER – The pitch can be changed by pressing the PITCH button, lighting the PITCH LED, and then
move the fader. The pitch will not be changed if the PITCH LED is off.
15.
PITCH BEND -/+ – You can use these two pitch bend buttons to temporarily adjust the pitch and tempo of the
music.
7 7
8
9
20
21
17
19
3
4
16
13
14
10
11
12
5
6
15
23
29
23
24
25
24
26
28
28
27
1
22
18
40
2
41
23
29
36
24
25
26
35
28
27
34
To create a cue point, move the JOG WHEEL
when the track is paused. The cue point will
be set once you start playback from that point
(by pressing PLAY / PAUSE).
3
7 7
8
9
21
17
19 20
16
13
3
4
14
10
11
12
5
6
15
39
30
38
31
37
32
Publicidad
Tabla de contenido
